Neutrik NA2-IO-DLINE 2-Channel XLR Line-Level I/O to Dante Adapter



Connect your legacy audio gear to the Dante® world

The NA2-IO-DLINE is an end-of-network device. It is a breakout box which allows two channels of audio to be integrated into a Dante network. Simultaneously, NA2-IO-DLINE converts a Dante stream into analog audio signals. Hence, it is possible to use this tiny box to feed analog audio signals into the Dante network while at the same time receiving a mix from another Dante source.

NA2-IO-DLINE is designed for harsh stage conditions. It therefore features lockable chassis connectors for both the audio and network connections. For fixed installations, the rubber protection can be removed. With optional mounting brackets or a rack panel, the box can be mounted below tables, in floor boxes, or in equipment racks. 
Features & Benefits
  • Connect analog audio equipment to a Dante network
  • Heavy duty adapter for rugged stage conditions
  • Lockable audio and network connections
  • Convert up to two analog line signals to a Dante network
  • Feed non Dante ready amplifiers, speakers or mixing desks with signals from the Dante network
  • Requires a Power over Ethernet switch or a PoE injector (802.3 af/at; class 1)
  • AES67 compliant
  • Rack mountable
  • For Dante related questions, refer to the Audinate web site: The Audinate web site features a wealth of manuals, teaching material, FAQs and videos. 

Audinate® is a registered trademark of Audinate Pty Ltd.
Dante is a trademark of Audinate Pty Ltd. 
Dante® specifications
Channels: 2 INPUTS (line level), 2 OUTPUTS (line level)
Supported sampling rates: 44.1 / 48 / 88.2 / 96 kHz
Bit depth: 16, 24 and 32 Bit
Latency: Depending on the network configuration, 1 ms (standard)
Ethernet connection: 100BASE-TX (PoE support)
Electrical specifications
Power consumption: < 2 watts
Power supply: PoE switch (Power over Ethernet) or PoE injector (according to IEEE 802.3af/at, class 1)
Analog audio input
Input impedance: 6.6 kOhm
Input level (balanced): Max. 22 dBu
Frequency response : 20 Hz to 20 kHz (+/-0.5 dB)
Dynamic range: > 100 dB
Signal-to-noise ratio: > 100 dB
THD + noise: < 0.01 % @ + 4 dBu, A-weighting
Crosstalk: < -80 dB @ 20 kHz
Analog audio output
Output impedance: < 800 Ohm
Output level (balanced): Max. 16 dBu
Frequency response: 20 Hz to 20 kHz (+/-0.5 dB)
Dynamic range: > 100 dB
Signal-to-noise ratio: > 100 dB
THD + noise: < 0.01 % @ + 4 dBu, A-weighting
Crosstalk: < -80 dB @ 20 kHz
Mechanical specifications
Weight: 0.44 kg (1 pound)
Dimensions (with rubber protection): L = 164 mm (6.3 inches), B = 82 mm (3.2 inches), H = 51 mm (2.0 inches)
Dimensions (without rubber protection): L = 151 mm (5.9 inches), B = 66 mm (2.6 inches), H = 41 mm (1.6 inches)
Operating environment: Indoor
Operating temperature: –5°C to +70°C
Storage temperature: –40°C to +150°C

You may also like

Recently viewed