Product Overview:
The ZC-3 from dbx is a wall-mount selector for DriveRack and ZonePro systems. It has a four-position rotary knob for program selection on DriveRack 260 and 220i systems, or source selection, page assignment, or scene selection for ZonePro devices. It also has four DIP switches for identification. The ZC-3 has two RJ-45 jacks for connection to a system via CAT5 cables.
Key Features:
- Wall-mount four-position rotary program selector
- Program selection for DriveRack 260 and 220i systems
- Source selection, page assignment, or scene selection for ZonePro devices
- Four DIP switches for controller identification
- Two RJ-45 jacks for standard CAT5 cabling
- Supports series or parallel wiring (parallel via ZC-BOB)
Specifications:
| Connectors |
(2) RJ-45 |
| Series Wiring |
Maximum cable length varies with number of zone controllers. Three zone controllers: 600 ft. Six zone controllers: 300 ft. |
| Parallel Wiring (using ZC-BOB) |
Up to six zone controllers: 1000 ft. |
| Parallel Wiring Cable |
CAT5 or CAT5E with 28.6 Ohm/M (Ohm/1000 ft.) nominal DCR, rated VW-1 or higher |
| Safety Agency Certifications |
UL 60065, IEC 60065, EN 55013, E60065 |
| MPN |
ZC-3 |
