Lutron RRD-8ANS-WH Maestro Neutral Switch- (White | Gloss)


Lutron® Maestro Neutral Switch

Use this neutral-based digital switch in many 120V applications. It can be controlled remotely in a smart RA2 Select lighting scene, or function as a standard switch if you prefer local control. Maestro Wireless technology offers impressive lighting control functionality and convenience that will fit almost any commercial or residential application. It’s incredibly easy to install and operate, so you can control lighting levels with any combination of up to 10 dimmers, switches, sensors and wireless controls — all with the touch of a button.

Motor & Output - When installing this switch, Lutron recommends you make sure the ratings of the motor do not exceed ¼ horsepower, or a 5.8 amp output. The motor will specify HP or the current rating (in amps).

FASS Replacement Option

All Maestro controls incorporate a Front Accessible Service Switch (FASS) for safe lamp replacement.

Easy Installation

Install this switch in single-pole or multi-location applications, in as little as fifteen minutes, to enable remote or local lighting control. Local controls are useful in locations where single circuits of lighting need to be adjusted. Plus, this switch’s neutral wire ensures better performance with LEDs or other specialized lighting, and a decrease in chance of flickering.

Frequency Range

Maestro controls communicate with the system through Radio Frequency (RF) and must be located within 30 ft. of a repeater. System devices operate on frequencies between 431 MHz and 437 MHz.

Switch Capabilities

On a single tap, lights or motors turn ON or OFF.

Color White, Gloss
Features Load Type: LED, Incandescent, Halogen, ELV, MLV, Fluorescent, Motor loads
Control Type: Switch
Wiring:Neutral wire required
Line Voltage 120 VAC, 50/60 Hz
Power Output 8 A (lighting), 0.25 HP (motor)
Minimum Load 10W / 10 VA / 0.08A Motor

    You may also like

    Recently viewed