A sturdy, cost-effective, in-ground mount (wet cement), gooseneck, card reader pedestal for cars, and pedestrians (See “Vehicle Height Chart”.) Also mounts intercoms, keypads, entry/exit buttons, biometric readers, telephone entry systems, housings, and other access control devices. Most often installed for automatic gate entry and exit, parking lot, and perimeter access applications. Includes a faceplate with universal holes patterns and a .5″ NPT hole (drilled and tapped) on the backside for easy wiring near ground level. This pedestal can be installed for various height requirements. In-ground (wet cement) pedestals are meant to save the installer time; however, if this pedestal becomes damaged (by a vehicle or otherwise) it is more cumbersome to replace. Conversely, pad mount pedestals require more labor from the installer; however, they are much easier to replace.
Whereas a competing pedestal may be made from a .074″ wall tube, this pedestal is made from .120″ wall tube (62% more steel) and is designed to withstand abuse from vandals or Mother Nature. This pedestal has passed our face wind testing protocol which determined it can survive sustained Category 5 hurricane-force winds of 157 mph.
The gooseneck is bent with the tightest 6″ center radius using a state-of-the-art mandrel bending die in which the curve is formed uniformly without collapsing the underside of the neck. Compared to competing pedestals with very long necks and/or loose bending tolerances, ours is the design preferred by professional installers.
Furthermore, this pedestal is first bead-blasted to eliminate contaminants and blemishes, then powder coated with an outdoor-rated TGIC polyester finish with UV protectant to help promote longevity in any weather condition.
Each pedestal includes carriage bolt hardware and is then wrapped in foam packaging and boxed individually for safe shipping.
Customized colors, heights, reaches, faceplates, and base plates are available– additional costs and lead times may apply.
A pedestal is often sold with a mounting bolt kit and card reader housing for a complete turnkey solution.
Pedestal PRO is the world’s leading manufacturer of access control pedestals and supports a global network of systems integrators and security professionals.
- black powder-coated, in-ground or wet cement pedestal, 12″ neck reach, 2″ square x .120″ wall tube, 4″ x 4″ x .120 faceplate, carriage bolts & nuts included, drilled and tapped .5″ NPT hole on the back of tube 23″ from the bottom.
|Depth for the mount