ZXI 5.25" 2-Way Coaxial Speakers with Kevlar Cone | 60 Watts RMS 4-Ohm

$84.95

DS18 ZXI-5254 Glass Fiber Cone 5.25" 2-Way Coaxial Car Speaker 180 Watts 4-Ohm

The ZXI series is the go to DS18 line for great sounding audio that not only has very high volume, but also amazing sound quality for an amazing price. The ZXI-5254 is 5.25" inch, 4 ohm coaxial speaker designed for mid tier audio enthusiasts to the extreme as they have an amazing range of frequencies and loudness. The 2- way design will ensure that you receive a full range of frequencies for an audio experience that you will truly remember.

Highlights

  • The ZXi line is a complete line of amps, subs, mids, and tweeters so you can match all your equipment up to be the same for an amazing show quality look.
  • 5.25" inch 2- way 4 ohm speaker requiring 60w RMS and 180w Max power handling that gives amazing sound from low to extremely high volume.
  • 2- way design will be sure to give you a full range of frequencies for an amazing audio experience to remember.

2-way coaxial speakers with kevlar cone2-way coaxial speakers with kevlar cone2-way coaxial speakers with kevlar cone2-way coaxial speakers with kevlar cone

Technical Details

Nominal Diameter 5.25” 
Nominal Impedance 4 ohms
RMS Power Handling 60 Watts
MAX Power Handling 180 Watts
Sensitivity (1w/1m) 89dB
Frequency Response 40Hz-20KHz
Recommended HI Pass Crossover 60Hz
Speaker Type 2-Way
Midrange:
Voice Coil Diameter 1” / 25.5mm
Voice Coil Former Material KSV
Winding Material EISV
Cone Material Glass fiber
Surround Material Rubber
Basket Material Steel
Magnet Material. Barium Ferrite
Magnet Weight 10.9 oz / 310g
Tweeter:
Nominal Diameter 1" / 25.4mm
Voice Coil Diameter 0.8" / ø20.4mm
Voice Coil Former Material KSV
Winding Material EISVM
Diaphragm Material PEI
Magnet Material. Neodymium
Magnet Weight 0.3 oz / 8.5g
Thiele & Small Parameters
Equivalent Volume 4.86L
Excursion (one way) 2.3mm
Free Air Resonance 77Hz
Mechanical Factor 8.39
Electrical Factor 0.87
Total Factor 0.79
Mechanical Mass 9.93g
Mechanical Compliance 457mm/N
BL Factor 4.321
Cone Area 86.5cm2
DC Resistance 3.5 ohm
Mechanical Mass w/o air 9.0g
Measurements
Overall Diameter 5.08” / 129mm
Overall Depth 2.80” / 71mm
Front Mount Baffle Cutout 4.45” / 113mm
Mouting Depth 2.28” / 58mm
Motor Diameter 3.31” / 84mm


Frequently Asked Questions

What is the power handling on the ZXI 5.25 2-Way Coaxial Speakers with Kevlar Cone | 60 Watts RMS 4-Ohm?+
The ZXI 5.25 2-Way Coaxial Speakers with Kevlar Cone | 60 Watts RMS 4-Ohm by DS18 is rated for high-output mobile audio. Check the product specs for RMS and peak power handling to match with your amplifier.
Is the ZXI 5.25 2-Way Coaxial Speakers with Kevlar Cone | 60 Watts RMS 4-Ohm waterproof or weather resistant?+
Marine and outdoor-rated speakers feature UV-resistant grilles and weatherproof cones. Confirm the IPX rating in the specs for exposed installations.
What cutout size does the ZXI 5.25 2-Way Coaxial Speakers with Kevlar Cone | 60 Watts RMS 4-Ohm require?+
Cutout dimensions vary by model. Use the included installation template or product spec sheet before cutting. Professional installation is recommended.
Can I run the ZXI 5.25 2-Way Coaxial Speakers with Kevlar Cone | 60 Watts RMS 4-Ohm off a factory head unit?+
Factory head units typically output 15–18W RMS per channel. For best performance, pair these speakers with an amplifier matched to their RMS rating.
What warranty does Silarius offer on the ZXI 5.25 2-Way Coaxial Speakers with Kevlar Cone | 60 Watts RMS 4-Ohm?+
Contact our support team at silarius.com for warranty information, returns, and technical assistance on DS18 products.

You may also like

Recently viewed