APC® H10BLK H-Type AV Power Conditioner, 120V, 1kVA (Black)


APC® H10BLK H-Type AV Power Conditioner, 120V, 1kVA (Black)

The H10 AV Power Conditioner from APC will protect your high performance audio and video (AV) system from damaging power surges, spikes, and lightning. Protection is guaranteed. Isolated noise filter banks and Automatic Voltage Regulation (AVR) will eliminate power as a source of audio and video signal degradation. Data-line surge protection jacks will stop surges traveling over phone lines. Digital Satellite System, Cable Modem, and CATV Coaxial Cable lines are equally protected. With APC’s H10, your entire home entertainment experience is bullet-proofed from damage as a result of bad power.


Unit Power Capacity

The H10 is rated for 1000 Watts (continuous). It has been designed, however, to support component inrush currents that are much higher than its continuous power rating. The H10 is capable of supplying the dynamic peak current draws required by any component designed to work on a 15A circuit. Despite their nameplate power ratings, high performance AV equipment draw much less than their listed power ratings. The H10 can inform the user how much of the power capacity is available as equipment is connected to the unit.


Automatic Voltage Regulation (AVR)

The H10 is unique in that it provides AVR, which is engaged to correct low and high voltage conditions. In doing so, all equipment connected to the H10 are protected against these undesired voltage fluctuations, thus, prolonging the life of the equipment.


Surge Protection

The H10 Power Conditioner provides a high level of surge protection for the voltage going into the unit, thus protecting the devices connected to the unit. Additionally, surge protected coax/radio frequency (RF) connectors are protected against surges traveling over coaxial lines to protect your digital satellite system (DSS), CATV box, or cable modem. Similarly, the telephone line surge protection feature provides a protected splitter to allow output to a telephone, modem, Digital Subscriber Line (DSL) modem, fax, digital video recorder (DVR), DSS system, set-top internet service provider (such as WebTV), or pay-per-view cable TV function.


Isolated Noise Filter Banks (INFB)

The H10 also provides INFB technology to eliminate electromagnetic and radio frequency interference that can negatively impact sound and video quality.


DC Trigger

When connected to a component acting as a DC trigger, that component controls the turning on/off of the ‘delayed’ outlet banks. The H10 also allows that DC signal to pass through to another connected component.


Removable Support Feet

The included support feet can be unscrewed and removed to save space when rack mounting.


12 Outlets

All outlets provide surge protection, voltage regulation, and noise filtering.


Sequenced Turn On/Off

Ensure connected equipment is powered-up/down in the proper order and with the right amount of delay between the stages. This feature allows the user to program a delay into the sequence between 0 and 12 seconds. This delay feature eliminates transients that can affect connected components.


Package Contents

The H10 includes the following items: (1) Power Conditioner, (1) Input Power Cord, (2) Coaxial Cables, (1) Telephone Cable, (2) Rack Mount Brackets (ears), User Manual, Equipment Protection Policy Sheet, and Warranty Registration Card.



For nearly four decades, APC has become the industry-standard for reliable power and physical IT infrastructure. Now the leading name in IT departments large and small and among our vast community of channel partners, our history of innovation has pushed our products into the global spotlight with infrastructure, management, and data security solutions protecting organizations around the world.

Includes: 6ft Gold Plated Coaxial Cable, Rack Mounting Brackets, RJ11 Cable, User Manual.
Automatic Voltage Regulation (AVR): Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Building Wiring Fault Indicator: This LED informs users of potentially dangerous wiring problems in the wall circuit.
IEEE Let-Through Ratings and Regulatory Agency Compliance: APC surge protectors undergo stringent testing by IEEE, and are awarded "let-through ratings", which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower IEEE let-through ratings indicate better protection and performance. The APC Essential SurgeArrest series offers optimal performance with a let-through rating of less than 330V to 500V for North American products, and a rating of less than 15% for products sold worldwide. All APC products comply with local agency safety requirements, including UL in North America and CE/Kema/Gost/C-tick/A-Tick/Telepermit in their respective regions.
Lightning and Surge Protection: To prevent damage to your equipment from electric power surges and spikes.
Noise Filtering: Attenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.
Overload Indicator: Indicator illuminates when connected equipment draws more power than unit’s capacity. To remedy the condition, unplug less vital equipment.
Phone Line Splitter: Allows use of two pieces of equipment at once, such as a modem and phone.
Protection Working Indicator: SurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.
Right Angle Plug: Plug angle allows for equipment and furniture to be placed closer to the wall than with a standard power cord. Reduces cord stress too.
Status Indicator LED's: LED status indicators for each phase and an audible alarm provide immediate failure notification when surge suppression circuitry has been damaged by a heavy strike or surge.
AV Power Conditioners & Battery Backups Features & Benefits
  • Adjustable voltage sensitivity - Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
  • Sequenced turn on/off - Helps power on components in the proper order to prevent speaker stress. Proper sequencing can also help manage current draw on startup to prevent unnecessary circuit breaker tripping.
  • LED & display dimmer - Adjust the unit's LED and display brightness independently of each other to suit your individual tastes and environment.
  • Front-access servicing -Simplifies installation and UPS maintenance while minimizing space requirements.
  • Resettable circuit breakers - Enables a quick recovery from overload events.
  • Multiple mounting methods - Allows for standardization on one product for use in different environments.
  • Isolated power filter banks - Eliminates electromagnetic and radio frequency interference (EMI/RFI) as a source of audio-video signal degradation.
  • Dataline surge protection - Provides protection of connected equipment from power surges on the data lines.
  • Safety-agency approved - Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Boost and Trim Automatic Voltage Regulation (AVR). (Does not apply to J25B) - Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
  • Power conditioning - Protects connected loads from surges, spikes, lightning, and other power disturbances.
Nominal Input Voltage: 120V
Input Frequency: 47 - 63 Hz
Input Connections: NEMA 5-15P
Cord Length: 10ft (3 meters)
Number of Power Cords: 1
Input Power: 1000.0 Watts
  • Height: 3.74" (95mm, 9.5cm)
  • Width: 17.0" (432mm, 43.2cm)
  • Depth: 9.5" (241mm, 24.1cm)
Rack Height: 2U
Net Weight: 16.1lbs (7.32kg)
Color: Black
Operating Temperature: 5 - 113°F (-15 - 45°C)
Operating Relative Humidity: 0 - 95%
Operating Elevation: 0 - 10000ft (0 - 3000 meters)
Storage Temperature: 0 - 40°C
Storage Relative Humidity: 0 - 95%
Storage Elevation: 0 - 50000ft (0 - 15000 meters)
Approvals: CSA, FCC Part 15 Class B, FCC Part 68, Industry Canada, UL 1012, UL 498
Equipment Protection Policy: Lifetime: $500,000
Standard Warranty: 5 year repair or replace

You may also like

Recently viewed