Set up a Wi-Fi camera in the IC See app

Applies to: Silarius Wi-Fi cameras that use the IC See app (shown in app stores as iCsee)

1. Power up the camera

   If you use a memory card, insert it first with the power off. Then connect the power adapter. The camera talks you through setup by voice.

2. Install the app

   Search for "iCsee" in your app store, or scan the QR code in the guide, and install it.

3. Register and log in

   Tap Register, use your email address as the account, confirm it from the email, then log in.

4. Get your Wi-Fi ready

   Connect your phone to your 2.4 GHz Wi-Fi (5 GHz is not supported). Keep the camera within 1-2 meters of the router and do not hide the Wi-Fi name.

5. Start adding

   Tap + in the top right corner, then tap Set up my device to Wi-Fi.

6. Confirm the Wi-Fi band

   Confirm your Wi-Fi is 2.4 GHz and tap Next step.

7. Enter your Wi-Fi password

   Enter the Wi-Fi password, tap the eye icon to check it, and tap OK. Do not close the screen while it searches.

8. Set a device password

   Enter a new password for the camera and save it somewhere safe. You need it to share the camera.

9. Name it and finish

   Enter a name for where the camera is installed and tap Save to see live video.

← All help articles